How To Tighten Balisong Pivot Pins

The balisong, also known as the butterfly knife, is a folding knife with two handles that rotate around the blade. The pivot pins are what hold the handles together and allow them to rotate. Over time, the pivot pins may become loose and need to be tightened.

How To Tighten Balisong Pivot Pins

There are a few ways to tighten balisong pivot pins. One way is to use a tool such as a pivot pin vise, which clamps the pivot pin and allows you to turn it with a wrench. Another way is to use a locking pliers (vise-grip) to grip the head of the pivot pin and twist it. A third way is to use a punch or chisel to drive the pivot pin out of the handle, then re-insert it

-A balisong -A screwdriver -A hammer -An anvil -A vise -Needle nose pliers

  • Remove the blade and springs
  • Look for the pivot pins, which are small silver rods, and use a screwdriver to tighten them re
  • Take the balisong apart by unscrewing the screws on the handles

1. Before tightening the pivot pins, make sure that the balisong is completely open. This will help to keep the pins in place and prevent them from becoming loose again. 2. Use a screwdriver or Allen wrench to tighten the pivot pins. Be careful not to over-tighten them, as this could damage the balisong. 3. Check the pins periodically to make sure that they have not become loose again. If they have, repeat the process

Frequently Asked Questions

What Can You Lube A Balisong With?

There are a few different things that people use to lube their Balisongs with. Some use oil, some use grease, and some use wax. It really just depends on the person’s preference.

Why Is My Balisong So Loose?

The screws that hold the blade in place may not be tight enough.

Should You Loctite Balisong?

No, you should not Loctite your Balisong.

What Loctite Do You Use For Balisongs?

There is no definitive answer to this question as different people have different preferences and opinions on what Loctite to use for balisongs. Some people recommend using Loctite Blue Gel, while others recommend using Loctite 648. Ultimately, it is up to the individual to decide which type of Loctite they prefer to use.

What Is Balisong Threadlocker?

Balisong Threadlocker is an adhesive that is used to keep screws in place. It is a liquid that seeps into the threads of the screw and hardens, making it difficult to remove.

How Often Should You Tune Your Balisong?

There is no one definitive answer to this question as it depends on a variety of factors, such as the quality of your Balisong, how often you use it, and the type of environment in which you use it. However, it is generally recommended that you tune your Balisong at least once a week.

What Does Loctite Do To A Balisong?

Loctite is a superglue that is used to attach the blade to the handles of a Balisong. It is usually applied in a thin line on the inside of the handles.

In Closing

There are a few ways to tighten balisong pivot pins. One is to use a clamp to hold the blade in place while tightening the screw. Another is to use a vise grip to hold the blade in place.

Leave a Comment